Tektronix MSO58

Commands listed in alphabetical order
Examples
DISplay:MATHF
FTView1:CURSor:HBArs:AUNIts?
might return
:DISPLAY:MATHFFTVIEW1:CUR SOR:HBARS:AUNITS "dBm" indicating the
units are dBm.
DISplay:MATHFFTView<x>:CURSor:HBArs:BPOSition
This command sets or returns the vertical cursor B position of the specified cursor
in the specified view.
Group
Cursor
Syntax
DISplay:MATHFFTView<x>:CU RSor:HBArs:BPOS
ition < NR3>
DISplay:MATHFFTView<x>:CU RSor:HBArs:BPOSition?
Arguments
<NR3> is the vertical cursor B position of the specified cursor in the specified view.
Examples
DISplay:MATHFFTView1:CURS or:HBArs:BPOSition 50.e-3 sets the
position to 50.0 mV.
DISplay:MATHFFTView1:CURS or:HBArs:BPOSition? might return
:DISPLAY:MATHFFTVIEW1:CUR SOR:HBARS:BPOSITION 9.91E +37
indicating the position is 9.91E+37.
DISplay:MATHFFTView<x>:CURSor:HBArs:BUNIts? (Query Only)
This command queries the cursor B vertical units of the specified cursor in the
specified view.
Group
Cursor
Syntax
DISplay:MATHFFTView<x>:CU RSor:HBArs:BUNIts?
Examples
DISplay:MATHFFTView1:CURS or:HBArs:BUNIts? might return
:
DISPLAY:MATHFFTVIEW1:CURSO R:HBARS:BUNITS "dBm" indicating the
cursor units are d Bm.
DISplay:MATHFFTView<x>:CURSor:HBArs:DELTa? (Query Only)
This command queries the delta cursor readout value of the specified cursor in
the specified view.
2-236 MSO54, MSO56, MSO58, MSO58LP Programmer