Tektronix MSO58 - DISplay:WAVEView<x>:CURSor:CURSOR<x>:DDT? (Query Only); DISplay:WAVEView<x>:CURSor:CURSOR<x>:FUNCtion

Commands listed in alphabetical order
Syntax
DISplay:WAVEV
iew<x>:CURSor:CURSOR<x>:BSOU rce
{CH<x>|BUS<x>|MATH<x>| REF<x>|PLOT<x>}
DISplay:WAVEView<x>:CURSor :CURSOR<x>:BSOUrce?
Arguments
Argumentsarethespecified source waveform.
Examples
DISplay:WAVEView1:CURSor:C URSOR1:BSOUrce CH1 sets the cursor B
source to channel 1 .
DISplay:WAVEView1:CURSor:C URSOR1:BSOUrce? might return
:DISPLAY:WAVEVIEW1:CURSOR: CURSOR1:BSOURCE REF1 indicating the
cursor b source is reference 1.
DISplay:WAVEView<x>:CURSor:CURSOR<x>:DDT? (Query Only)
This query returns the delta V over delta T cursor readout value of the specified
cursor in the specified waveview.
NOTE.
WAVEView<x > is the specified waveview and must be WAVEView1 .
Cursor<x> is the specified cursor and must be CURSOR1 .
Group
Cursor
Syntax
DISplay:WAVEView<x>:CURSor :CURSOR<x>:DDT?
Returns
The delta V over delta T cursor readout value of the specified cursor in the
specified waveview.
Examples
DISplay:WAVEView1:CURSor:C URSOR1:DDT? might return
:DISPLAY:WAVEVIEW1:CURSOR: CURSOR1:DDT 9.91E+37 indicating the delta
V over delta T cursor readout value of the specified cursor is 9.91E+37.
DISplay:WAVEView<x>:CURSor:CURSOR<x>:FUNCtion
This command sets or queries the cursor type of the specified cursor in the
specified waveview.
NOTE.
WAVEView<x > is the specified waveview and must be WAVEView1 .
Cursor<x> is the specified cursor and must be CURSOR1 .
MSO54, MSO56, MSO58, MSO58LP Programmer 2-289