Tektronix MSO58 User Manual (English)

To Next Page

To Previous Page

Commands listed in alphabetical order

REF<x>_D<x>:LABel:NAMe

Sets or queries the label of the speciﬁed digital bit. The channel is speciﬁed by x.

Group

Digital

Syntax

REF<x>_D<x>:LABel:NAMe <QString>

Arguments

<QString> is the label.

Examples

REF1_D1:LABel:NAMe "Clock in" sets the name to Clock in.

REF1_D1:LABel:NAMe? might return : REF1_D1:LABEL:N AME "Digital 1".

REF<x>_D<x>:LABel:XPOS

This command sets or queries the x-position of the label of the speciﬁed digital

bit. The reference is speciﬁed by x.

Group

Digital

Syntax

REF<x>_D<x>:LABel:XPOS <NR3>

Arguments

<NR3> is the x-position, in pixels relative to the left edge of the display, of the

label.

Examples

REF1_D1:LABel:XPOS 90 sets the

x position to 90.

REF1_D1:LABel:XPOS? might return :REF1_D1:LABEL:XPOS 45.0000

indicating the position is 45 p

ixels to the right of the left edge of the waveform.

REF<x>_D<x>:LABel:YPOS

This command sets or queries the y-position of the label of the speciﬁed digital

bit. The channel is speciﬁed by x.

Group

Digital

MSO54, MSO56, MSO58, MSO58LP Programmer 2-613

Tektronix MSO58 User Manual