Tektronix MSO58 User Manual

Commands listed in alphabetical order
Examples
SEARCH:SEARCH
1:TRIGger:A:BUS:FLEXRAY:FRAM EType startup
sets the
frame type to startup.
SEARCH:SEARCH1:TRIGger:A:B US:FLEXRAY:FRAMEType? might return
:SEARCH:SEARCH1:TRIGGER:A: BUS:FLEXRAY:FRAMETYPE NOR MAL,
indicating the frame type is normal.
SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CRC
This command sets or queries the CRC portion of the binary header string
whensearching on a FlexRay bus header. The search number is specified by <x>.
Conditions
Requires the SR-AUTO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:FLEXRAY:HEADER:CRC < QString>
SEARCH:SEARCH<x>:TRIGger:A :BUS:FLEXRAY:HEADER:CRC?
Arguments
<QString> specifies the CRC.
Examples
SEARCH:SEARCH<x>:TRIGger:A :BUS:FLEXRAY:HEADER:CRC " 1010" sets
the header CRC to XXXXXX101.
SEARCH:SEARCH<x>:TRIGger:A :BUS:FLEXRAY:HEADER:CRC? might
re
turn
:SEARCH:SEARCH1:TRIGGER:A :BUS:FLEXRAY:HEADER:CRC
"XXXXXXXXXXX"
, indicating the header CRC is a don’t care.
SEARCH:SEARCH<x>:TRIGger:A:BUS:FLEXRAY:HEADER:CYCLECount
This command sets or queries the cycle count portion of the binary header string
when searching on a FlexRay bus header. The searc h number is specified by <x>.
The search c ondition must be set to HEADer.
Conditions
Requires the SR-AUTO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:FLEXRAY:HEADER:CYCLECount
<QString>
SEARCH:SEARCH<x>:TRIGger:A :BUS:FLEXRAY:HEADER:CYCLECount?
MSO54, MSO56, MSO58, MSO58LP Programmer 2-671

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English