Tektronix MSO58 User Manual

Commands listed in alphabetical order
SEARCH:SEARC
H<x>:TRIGger:A:STOPAcq
This command sets or queries whether acquisitions are stopped when a search hit
is found. The search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:STOPAcq {<NR1>|OFF|ON}
Arguments
<NR1> = 1 enables stopping when a search hit is found. Any other character
disables the feature.
ON enables stopping when a search hit is found.
OFF disables stopping on a search hit.
Examples
SEARCH:SEARCH1:TRIGger:A: STO
PAcq ON
enables stopping when a search
hit is found.
SEARCH:SEARCH1:TRIGger:A: ST
OPAcq?
might return
:SEARCH:SEARCH1:TRIGGER:A :STOPACQ 0 indicating acquisitions
are stopped when a search hit is found.
SEARCH:SEARCH<x>:TRIGger:
A:TIMEOut:LOGICQUALification
This command specifies whether or not to use logic qualification for a timeout
search. The search number is specifi ed by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:TIMEOut:LOGICQUALification
{ON|OFF}
SEARCH:SEARCH<x>:TRIGger: A:TIMEOut:LOGICQUALification?
Arguments
ON specifies to use logic qualification.
OFF specifies not to u
se logic qualification.
Examples
SE
ARCH:SEARCH1:TRIGger:A:TIME Out:LOGICQUALification O N
specifies to use logic qualification.
2-738 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English