Tektronix MSO58

Commands listed in alphabetical order
MATH:MATH<x>
:LABel:FONT:UNDERline
This command sets or queries the underline state of the specified math label.
The math waveform is specified by x.
Group
Math
Syntax
MATH:MATH<x>:LABel:FONT:U NDERline {<NR1>|OFF|ON}
Arguments
<NR1> = 0 turns off underline, and any other integer turns on underline.
OFF turns off underline.
ON turns on underline.
Examples
MATH:MATH3:FONT:UNDERLINE ON sets the math 3 label to be underlined.
MATH:MATH2:FONT:UNDERLINE ? might return
:MATH:MATH2:FONT:UNDERLIN E 0 indicating the math 2 label is currently
not underlined.
MATH:MATH<x>:LABel:NAMe
This command sets or queries the label string, which is used for annotating the
math waveform on the screen. The math waveform to which the l abel is attached
is specified by x.
Group
Math
Syntax
MATH:MATH<x>:LABel:NAMe <QString>
MATH:MATH<x>:LABel:NAMe?
Arguments
<QString> specifies the label to annotate the math waveform.
Examples
MATH:MATH2:LABel:NAMe "PROBE POINT7" assigns "Probe point7" Math
2 waveform.
MATH:MATH2:LABel:NAMe? might return :MATH:MATH2:LABel:NAMe
"Probe point7"
, indicating that Probe point 7 is the label for the Math 2
waveform.
2-370 MSO54, MSO56, MSO58, MSO58LP Programmer