Tektronix MSO58

Commands listed in alphabetical order
POWer:POWer<
x>:REFLevels:ABSolute:FALLMid
This command sets or queries the falling edge for mid reference level in absolute
units for the specified power measurement badge. The power measurement badge
is specified b
yx.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
Syntax
POWer:POWer<x>:REFLevels:A BSolute:FALLMid <NR1>
POWer:POWer<x>:REFLevels:A BSolute:FALLMid?
Related Commands
POWer:POWer<x>:REFLevels:METHod, POWer:POWer<x>:REFLevels:
ABSolute:TYPE
Arguments
<NR1> ranges from -40000 to 40000
Examples
POWer:POWer1:REFLevels:ABS olute:FALLMid 0 sets the mid reference
level for falling edge as 0 volt.
POWer:POWer<x>:REFLevels:ABSolute:HYSTeresis
This command sets or queries the abs olute hystere sis value for the specified power
measurement badge. The power m easurement badge is specified by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
Syntax
POWer:POWer<x>:REFLevels:A BSolute:HYSTeresis <NR1>
POWer:POWer<x>:REFLevels:A BSolute:HYSTeresis?
Related Commands
POWer:POWer<x>:REFLevels:METHod
Arguments
<NR1> ranges from 0.0000005 to 10
MSO54, MSO56, MSO58, MSO58LP Programmer 2-553