Tektronix MSO58 User Manual

Commands listed in alphabetical order
Syntax
DISplay:REFFF
TView<x>:ZOOM:XAXIS:TO
<NR3>
DISplay:REFFFTView<x>:ZOO M:XAXIS:TO?
Arguments
<NR3> is the right edge of the zoom x-axis in the specified plot view.
Examples
DISplay:REFFFTView5:ZOOM: XAXIS:TO 2.0E+8 sets the right edge of the
zoom x-axis to 200 MHz.
DISplay:REFFFTView5:ZOOM: XAXIS:TO? might return
:DISPLAY:REFFFTVIEW5:ZOOM :XAXIS:TO 235.03769331789 95E+6
indicating the right edge of the zoom x-axis is 235.0 MHz.
DISplay:REFFFTView<x>:ZOOM:YAXIS:FROM
This command sets or queries the bottom value of the zoom y-axis in the specified
plot view.
Group
Zoom
Syntax
DISplay:REFFFTView<x>:ZOO M:YAXIS:FROM <NR3>
DISplay:REFFFTView<x>:ZOO M:YAXIS:FROM?
Arguments
<NR3> is the bottom value of the zoom y-axis in the specified plot view.
Examples
DISplay:REFFFTView5:ZOOM: YAXIS:FROM -120.0 sets the bottom value of
the zoom y-axis to -120.0 dBm.
DISplay:REFFFTView5:ZOOM: YAXIS:FROM? might return
:DISPLAY:REFFFTVIEW5:ZOOM :YAXIS:FROM -129.75331206 32172
indicating the bottom value of the zoom y-axis is -129.8 dBm.
DISplay:REFFFTView<x>:ZOOM:YAXIS:TO
This command sets or queries the top value of the zoom y-axis in the specified
plot view.
Group
Zoom
Syntax
DISplay:REFFFTView<x>:ZOO M:YAXIS:TO <NR3>
DISplay:REFFFTView<x>:ZOO M:YAXIS:TO?
2-278 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English