Tektronix MSO58

Commands listed in alphabetical order
Group
Vertical
Syntax
CH<x>:LABel:FONT:BOLD {ON|OFF|<NR1> }
Arguments
OFF argument turns off bold font.
ON argument turns on bold font.
<NR1> = 0 turns off bold font; any other value turns on bold font.
Examples
CH2:LABel:FONT:BOLD OFF turns off the bold font.
CH2:LABel:FONT:BOLD? might return :CH2:LABEL:FONT:BOLD 1 indicating
a bold font.
CH<x>:LABel:FONT:ITALic
This command sets or queries the italic state of the specified channel label. The
channel is specified by x.
Group
Vertical
Syntax
CH<x>:LABel:FONT:ITALic {ON|OFF|<NR1>}
Arguments
OFF argument turns off italic font.
ON argument turns on italic font.
<NR1> = 0 turns off italic font; any other value turns on italic font.
Examples
CH2:LABel:FONT:ITALic ON set the font to italic.
CH2:LABel:FONT:ITALic? might return :CH2:LA BEL:FONT:ITALIC 0
indicating the font is not italic.
CH<x>:LABel:FONT:SIZE
This command sets or queries the font size of the specified channel label. The
channel is specified by x.
Group
Vertical
MSO54, MSO56, MSO58, MSO58LP Programmer 2-191