Tektronix MSO58

Commands listed in alphabetical order
DISplay:PLOT
View<x>:CURSor:SCREEN:AXPOSition
This command sets or queries the horizontal cursor A position of the specified
cursor in the specified view.
Group
Cursor
Syntax
DISplay:PLOTView<x>:CURSo r:SCREEN:AXPOSition <NR3>
DISplay:PLOTView<x>:CURSo r:SCREEN:AXPOSition?
Arguments
<NR3> is the horizontal cursor A position.
Examples
DISplay:PLOTView1:CURSor: SCREEN:AXPOSition -5.0 sets the A X
cursor position to —5.0 ns.
DISplay:PLOTView1:CURSor: SCREEN:AXPOSition? might return
:DISPLAY:PLOTVIEW1:CURSOR :SCREEN:AXPOSITION -5.546 0E-9
indication the cursor A X position is -5.546 ns.
DISplay:PLOTView<x>:CURSor:SCREEN:AYPOSition
This command sets or queries the vertical cursor A position of the specified cursor
in the specified view.
Group
Cursor
Syntax
DISplay:PLOTView<x>:CURSo r:SCREEN:AYPOSition <NR3>
DISplay:PLOTView<x>:CURSo r:SCREEN:AYPOSition?
Arguments
<N
R3>
is the vertical cursor A position.
Examples
DISplay:PLOTView1:CURSor: SCREEN:AYPOSition 2.0 set the A cursor
Y position to 2.0 Volts.
DISplay:PLOTView1:CURSor: SCREEN:AYPOSition? might return
:DISPLAY:PLOTVIEW1:CURSOR :SCREEN:AYPOSITION 1.9035 indicating
the A cursor Y position is 1.9035 V.
2-254 MSO54, MSO56, MSO58, MSO58LP Programmer