Tektronix MSO58

Commands listed in alphabetical order
DISplay:PLOT
View<x>:CURSor:SCREEN:BXPOSition
This command sets or queries the horizontal cursor B position of the specified
cursor in the specified view.
Group
Cursor
Syntax
DISplay:PLOTView<x>:CURSor :SCREEN:BXPOSition <NR3>
DISplay:PLOTView<x>:CURSor :SCREEN:BXPOSition?
Arguments
<NR3> is the horizontal cursor B position.
Examples
DISplay:PLOTView1:CURSor:S CREEN:BXPOSition 59.0E-9 sets the B
cursor X position to 59.0 ns.
DISplay:PLOTView1:CURSor:S CREEN:BXPOSition? might return
:DISPLAY:PLOTVIEW1:CURSOR: SCREEN:BXPOSITION 59.6802 E-9
indicating the B cursor X position is 59.6802 ns.
DISplay:PLOTView<x>:CURSor:SCREEN:BYPOSition
This command sets or queries the vertical cursor B position of the specified cursor
in the specified view.
Group
Cursor
Syntax
DISplay:PLOTView<x>:CURSor :SCREEN:BYPOSition <NR3>
DISplay:PLOTView<x>:CURSor :SCREEN:BYPOSition?
Arguments
<NR3> is the vertical cursor B position.
Examples
DISplay:PLOTView1:CURSor:S CREEN:BYPOSition 0.589 sets the B cursor
Y position to 589 mV.
DISplay:PLOTView1:CURSor:S CREEN:BYPOSition? might return
:DISPLAY:PLOTVIEW1:CURSOR: SCREEN:BYPOSITION 589.069 6E-3
indicating the B cursor Y position is 589.0696 mV.
DISplay:PLOTView<x>:CURSor:SPLITMODE
Thiscommandsetsorqueriesthecursorsourcemodeinthespecified view.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-255