Tektronix MSO58

Commands listed in alphabetical order
Group
Power
Syntax
POWer:POWer<x>:POWERQUALI TY:FRE
Ference
{VOLTage | CURRent}
POWer:POWer<x>:POWERQUALI TY:FREFerence?
Examples
POWer:POWer1:POWERQUALITY :FREFerence CURRent sets the fr equency
reference type for power quality measurement as current.
POWer:POWer<x>:POWERQUALITY:ISOURce
This command sets or queries the current source for power quality measurement
in the specified power measurement badge. The power measurement badge
is specified by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
Syntax
POWer:POWer<x>:POWERQUALI TY:ISOURce {CH<x> | MATH<x> | REF<x>}
POWer:POWer<x>:POWERQUALI TY:ISOURce?
Arguments
CH<x> = A channel specifier; <x> is 1 through 8 and is limited by the number
of FlexChannels in your instrument.
MATH<x> = A math waveform specifier; <x> is ≥1.
REF<x> = A reference waveform specifier; <x> is ≥1.
Examples
POWer:POWer1:POWERQUALITY :VSOURce CH2 sets the curre nt source for
power quality measurement as channel 2.
POWer:POWer<x>:POWERQUALITY:VSOURce
This command sets or queries the voltage source for power quality measurement
in the specified power measurement badge. The power measurement badge
is specified by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
2-550 MSO54, MSO56, MSO58, MSO58LP Programmer