Tektronix MSO58

Commands listed in alphabetical order
MATH:MATH<x>:VUNIT
This command specifies or returns the math custom vertical units. The math
waveform is specified by x.
Group
Math
Syntax
MATH:MATH<x>:VUNIT <QString>
Arguments
<QString> is the custom vertical units.
Examples
MATH:MATH2:VUNIT "Small"
MATH:MATH2:VUNIT? might return :MATH :MATH2:VUNIT "Large" indicating
the Math 2 vertical unit is set to "Large".
MATHArbflt<x>:FILepath
This command or query sets the file path for a file of filter coefficients for the
specified arbitrary filter. Setting a path will read that file and load the filter for
ARBFLT<x>. Access these filters using a Math with an expression of the form
"ARBFlt<x>()”.
Group
Math
Syntax
MATHArbflt<x>:FILepath <QString>
MATHArbflt<x>:FILepath?
Arguments
<QString> specifiesthepathtothefile of filter coefficients.
Examples
MATHARBFLT8:FILEPATH "c:/myfilters/ 20mhz.flt" reads filter
coefficients from the file and loads the filter for ARBFLT8.
MATHARBFLT1:FILEPATH? might return :MATHARBFLT1:FILEPATH
"C:\Users\Public\Tektronix \TekScope\Math Arbitrary
Filters\LowPass-Norm\lowpa ss_0.bw.flt"
,i
ndicating that the path to
the fi le of filter coefficients is set to "C:\Users\Public\Tektronix\TekScope\Math
Arbitrary Filters\LowPass-Norm\lowpass_0.bw.flt".
MSO54, MSO56, MSO58, MSO58LP Programmer 2-379