To Next Page

To Previous Page

Commands listed in alphabetical order

Examples

DISplay:MATHF

FTView1:GRIDlines VERTICAL

speciﬁes vertical grid lines.

DISplay:MATHFFTView1:GRID lines? might return

:DISPLAY:MAT

HFFTVIEW1:GRIDLINES BOTH

indicating both

horizontal and vertical grid lines are displayed.

DISplay:MATHFFTView<x>:MATH:MATH<x>:STATE

This command sets or queries the state of the speciﬁed math waveform in the

speciﬁed waveview.

Group

Display Control

Syntax

DISplay:MATHFFTView<x>:MA TH:MATH<x>:STATE {OFF|ON|<NR 1>}

Arguments

OFF disables the speciﬁed math.

ON enables the speciﬁed math.

<NR1> = 0 disables the speciﬁed math; any other value enables the speciﬁed math.

Examples

DISplay:MATHFFTView1:MATH :MATH1:STATE ON enables the speciﬁed math.

DISplay:MATHFFTView1:MATH :MATH1:STATE? might return

:DISPLAY:MATHFFTVIEW1:MAT H:MATH1:STATE 1 indicating the speciﬁed

math waveform in the speciﬁed waveview is displayed.

DISplay:MATHFFTView<x>:XAXIS:SCALE

This command sets or queries the x-axis scale setting for FFT Math waveforms,

either Linear or Log.

Group

Display Control

Syntax

DISplay:MATHFFTView<x>:XA XIS:SCALE {LINEAr|LOG}

DISplay:MATHFFTView<x>:XA XIS:SCALE?

Arguments

LINEAr speciﬁes a linear scale.

LOG speciﬁes a logarithmic scale.

2-244 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 User Manual

Other manuals for Tektronix MSO58