To Next Page

To Previous Page

Commands listed in alphabetical order

Group

Measurement

Syntax

MEASUrement:MEAS<x>:REFLev els<x>:ABSolute:TYPE {SAM E|UNIQue}

MEASUrement:MEAS<x>:REFLev els<x>:ABSolute:TYPE?

Arguments

SAME speciﬁes that the absolute levels are set the same.

UNIQue speciﬁes that the absolute levels can be set independently.

Examples

MEASUrement:MEAS1:REFLevel s1:ABSolute:TYPE UNIQUE speciﬁes that

the absolute levels can be set independently.

MEASUrement:MEAS1:REFLevel s1:ABSolute:TYPE? might return

:MEASUREMENT:MEAS1:REFLEVE LS1:ABSOLUTE:TYPE SAME indicating the

absolute levels are set the same.

MEASUrement:MEAS<x>:REFLevels<x>:BASETop

This command sets or queries the method used to calculate the TOP and BASE

used to calculate reference levels for the measurement. The measurement number

is speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:REFLev els<x>:BASETop

{AUTO|MINMax|MEANhistogram | MODEhistogram|EYEhistogram }

MEASUrement:MEAS<x>:REFLev els<x>:BASETop?

Arguments

AUTO automatically chooses a reference level method.

MINMax speciﬁes that reference levels a re relative to the measurement MIN and

MAX.

MEANhistogram speciﬁes that reference levels are relative to the histogram mean

BASE and TOP.

MODEhistogram speciﬁes that reference levels are relative to the histogram mode

BASE and TOP.

EYEhistogram speciﬁes that reverence levels are relative to the eye histogram

BASE and TOP.

Examples

MEASUrement:MEAS1:REFLevel s1:BASETop MINMAX speciﬁes that reference

levels are relative to the measurement MIN and MAX.

MSO54, MSO56, MSO58, MSO58LP Programmer 2-473

Tektronix MSO58 User Manual

Other manuals for Tektronix MSO58