Tektronix MSO58

Commands listed in alphabetical order
Syntax
POWer:POWer<x
>:REFLevels:PERCent:FALLLow
<NR1>
POWer:POWer<x>:REFLevels: PERCent:FALLLow?
Related Commands
POWer:POWer<x>:REFLevels:METHod, POWer:POWer<x>:REFLevels:
PERCent:TYPE
Arguments
<NR1> ranges from 1 to 99.
Examples
POWer:POWer1:REFLevels:PE RCent:FALLLow 0 sets the low reference level
for falling edge as 0 percentage.
POWer:POWer<x>:REFLevels:PERCent:FALLMid
This command sets or queries the falling edge for mid refer
ence level in
percentage for the specified pow er measurement badge. The power measurement
badge is specified by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
Syntax
POWer:POWer<x>:REFLevels: PERCent:FALLMid <NR1>
POWer:POWer<x>:REFLevels: PERCent:FALLMid?
Related Commands
POWer:POWer<x>:REFLevels:METHod, POWer:POWer<x>:REFLevels:
PERCent:TYPE
Arguments
<NR1> ranges from 1 to 99.
Examples
POWer:POWer1:REFLevels:PE RCent:FALLMid 50 sets the mid reference
level for falling edge as 50 percentage.
POWer:POWer<x>:REFLevels:PERCent:HYSTeresis
This command sets or queries the hysteresis in perce ntage for the specified power
measurement badge. The power measurement badge is specified by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
2-558 MSO54, MSO56, MSO58, MSO58LP Programmer