Tektronix MSO58

Commands listed in alphabetical order
Examples
CH4:PROBEFUNC
:EXTUNITS "Pascals"
sets the unit of measurement for the
Channel 4 external attenuator.
CH2:PROBEFUN
C:EXTUNITS?
might return :CH2:PROBEFUNC:EXTUNITS
"Pascals"
, indicating that the Channel 2 external attenuator units of
measurement are Pascals.
CH<x>:PROB
EFunc:EXTUnits:STATE
This command sets or queries the custom units enable state for the specified
channel. The channel is specified by x.
Group
Vertical
Syntax
CH<x>:PROBEFunc:EXTUnits:S TATE {ON|OFF|<NR1>}
Arguments
OFF argument turns off external units.
ON argument tu rns on external units.
<NR1> = 0 turns off external units; any other value turns on external units.
Examples
CH2:PROBEFunc:EXTUnits:STA TE ON turns on external units.
CH2:PROBEFunc:EXTUnits:STA TE? might return
:CH2:PROBEFUNC:EXTUNITS:ST ATE 0 indicating that external units are
off for the specified channel.
CH<x>:SCAle
This command sets or returns the vertical scale for the specified analog channel.
The channe l is specified by x.
Group
Vertical
Syntax
CH<x>:SCAle <NR3>
Arguments
<NR3> is the vertical scale for the specified analog channel.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-203