Tektronix MSO58

Commands listed in alphabetical order
Arguments
<QString> is th
e name of the group.
Examples
CH1_DALL:LABel:NAMe “Clock Out” sets the label name to Clock Out.
CH1_DALL:LABel:NAMe? might return :CH1_DALL:LABEL:NAME "This is
the dig ital name"
.
CH<x>_D<x>:LABel:COLor
This command sets or queries the color of the label of the specified digital bit.
The channel is specified by x.
Group
Digital
Syntax
CH<x>_D<x>:LABel:COLor <QString>
Arguments
<QString> is the label color. To return the color to the default color, send an
empty string as in this example:
:CH5_D1:LABEL:COLOR "".
Examples
CH1_D1:LABel:COLor "#FF0000" sets the color to red.
CH1_D1:LABel:COLor? might return :CH 1_D1:LABEL:COLOR "#FFFF00"
indicating the color is yellow.
CH<x>_D<x>:LABel:FONT:BOLD
This command sets or queries the bold state of the label of the specified digital bit.
The channel is specified by x.
Group
Digital
Syntax
CH<x>_D<x>:LABel:FONT:BOL D {ON|OFF|<NR1>}
Arguments
OFF argument turns off bold font.
ON argument turns on bold font.
<NR1> = 0 turns off bold font; any other value turns on bold font.
2-208 MSO54, MSO56, MSO58, MSO58LP Programmer