Commands listed in alphabetical order
SEARCH:SEARC
H<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:INSTR
This command sets or queries the value of the instrumentation bit (INSTR bit, bit
10) in a status word for a MIL-STD-1553 bus to search on. The search number is
specified by x
. The search condition must b e set to STATus.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:STATus:BIT:INSTR
{ONE|ZERo|NOCARE}
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:STATus:BIT:INSTR?
Arguments
ONE filters
status words to only match those where the INSTR bit has a value of 1.
ZERo filters status words to only match those where the INSTR bit has a value of 0.
NOCARE disables filtering of status words on the INSTR bit.
Examples
SEARCH:SEARCH1:TRIGGER:A: BUS:MIL1553B:STATUS:BIT:INSTR ONE
specifies fi ltering status words for those where the INSTR bit has a value of 1.
SEARCH:SEARCH1:TRIGGER:A: BUS:MIL1553B:STATUS:BIT:INSTR? might
return NOCARE, indicating that status words are not being filtered based on the
INSTR bit value.
SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:BIT:ME
This command sets or queries the value of the message error bit (ME bit, bit 9)
in a status word for a MIL-STD-1553 bus to search on. The search number is
specified by x. The search condition must be set to STATus.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:STATus:BIT:ME
{ONE|ZERo|NOCARE}
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:STATus:BIT:ME?
2-692 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
