Tektronix MSO58 - SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:POLarity; SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce

Commands listed in alphabetical order
SEARCH:SEARCH
1:TRIGger:A:TIMEOut:LOGICQUA Lification?
might
return
:SEARCH:SEARCH1:TRIGGER:A:TI MEOUT:LOGICQUALIFICATION
OFF
indicating logic qualification is off.
SEARCH:SEAR
CH<x>:TRIGger:A:TIMEOut:POLarity
The polarity to be use d for a Timeout search. The search number is specified
by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :TIMEOut:POLarity
{STAYSHigh|STAYSLow|EITher }
SEARCH:SEARCH<x>:TRIGger:A :TIMEOut:POLarity?
Arguments
STAYSHigh specifies the polarity stays HIGH.
STAYSLow specifies the polarity stays LOW.
EITher specifies the polarity stays HIGH or stays LOW.
Examples
SEARCH:SEARCH1:TRIGger:A:T IMEOut:POLarity STAYSLOW specifies
the polarity stays LO W.
SEARCH:SEARCH1:TRIGger:A:T IMEOut:POLarity? might return
:SEARCH:SEARCH1:TRIGGER:A: TIME
OUT:POLARITY STAYSHIGH
indicating
the polarity stays H IGH.
SEARCH:SEARCH<x>:TRIGger:A:TIMEOut:SOUrce
This command sets and querie s the source for timeout search input. The search
number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :TIMEOut:SOUrce
{CH<x>|CH<x>_D<x>|MATH<x>R EF<x>|REF<x>_D<x>]
SEARCH:SEARCH<x>:TRIGger:A :TIMEOut:SOUrce?
Arguments
Arguments are the available sources.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-739