Tektronix MSO58

Commands listed in alphabetical order
Examples
DISplay:SELec
t:MATH MA TH1
selects Math 1.
DISplay:SELect:MATH? might display :DISPLAY:SELECT:MATH MATH2
indicating Ma
th2isselected.
DISplay:SELect:REFerence
This command sets or queries the overall selected reference waveform. Sets are
applied to all views t hat contain the source and the selected view is changed.
Group
Display Control
Syntax
DISplay:SELect:REFerence {NONE|REF<x>}
Arguments
Arguments are the selected reference.
Examples
DISplay:SELect:REFerence REF2 selects reference 2.
DISplay:SELect:REFERENCE? might return DISP LAY:SELECT:REFER ENCE
NONE
indicating no reference is selected.
DISplay:SELect:SOUrce
This command sets or queries the overall selected source. Sets are applied to all
views that contain the source and the s elected view is changed.
Group
Display Control
Syntax
DISplay:SELect:SOUrce
{NONE|CH<x>|BU
S<x>|MATH<x>|PLOT<x>|REF<x> }
Arguments
Arguments are the selected source.
Examples
DISplay:SELect:SOUrce Bus1 selects Bus1 as the selected source.
DISplay:SELect:SOUrce? might return :DISPLAY:SELECT:SOURCE MATH1
indicating Math 1 is the selected source.
2-280 MSO54, MSO56, MSO58, MSO58LP Programmer