Tektronix MSO58

Commands listed in alphabetical order
Related Commands
SAVEON:FILE:D
EST, SAVEON:FILE:NAME, SAVEON:TRIGger
Arguments
<NR1> = 0 disables Save On Waveform; any other value turns this feature on.
OFF disables Save On Waveform.
ON enables Save O n Waveform.
Examples
SAVEON:WAVEFORM ON turns on the Save On Waveform feature, so that a
waveform will be saved when a selected trigger occurs.
SAVEON:WAVEFORM? might return :SAVEON:W AVEFORM ON, indicating that a
waveform will be saved when a selected trigger occurs.
SAVEON:WAVEform:FILEFormat
This command sets or que ries the file format for
saving waveforms when
:SAVEON:WAVEform is set to 1.
Group
Save On
Syntax
SAVEON:WAVEform:FILEFormat {INTERNal|S PREADSheet}
SAVEON:WAVEform:FILEFormat ?
Arguments
INTERNal specifies saving the waveform in the oscilloscope internal format.
SPREADSheet specifies saving the waveform in comma separated values format.
Examples
SAVEON:WAVEFORM:FILEFORMAT SPREADSheet sets the file format to
spreadsheet.
SAVEON:WAVEFORM:FILEFORMAT? might return
:SAVEON:WAVEFORM:FILEFORMA T INTERNAL indicating the file format is set
to
INTERNAL.
SAVEON:WAVEform:SOURce
This command sets or queries the sources for saving waveforms when
SAVEON:TRIGger is ON.
Group
Save On
MSO54, MSO56, MSO58, MSO58LP Programmer 2-627