Tektronix MSO58

Commands listed in alphabetical order
Group
AFG
Syntax
AFG:FREQuency <NR3>
AFG:FREQuency?
Arguments
NR3 is the floating point number that represents the AFG frequency, in Hz.
Examples
AFG:FREQUENCY 100.0E3 sets the AFG frequency to 100 kHz.
AFG:FREQUENCY? might return :AFG:FREQUENC Y 312.5000E+3 indicating the
frequency is set to 312.5 kHz.
AFG:FUNCtion
Sets (or queries) which AFG function to execute.
Conditions
Requires option A FG.
Group
AFG
Syntax
AFG:FUNCtion
{SINE|SQUare|PULSe|RAMP|NO ISe|DC|SINC|GAUSsian|LORENtz
|ERISe|EDECAy|HAVERSINe|CA RDIac|ARBitrary}
AFG:FUNCtion?
Arguments
SINE
SQUare
PULSe
RAMP
NOISe
DC – The DC level is c ontrolled by AFG:OFFSet.
SINC (Sin(x)/x)
GAUSsian
LORENtz
ERISe
EDECAy
MSO54, MSO56, MSO58, MSO58LP Programmer 2-101