Tektronix MSO58

Commands listed in alphabetical order
Arguments
ON displays the
label in underlined font.
OFF does not display the label in underlined font.
1 displays the label in underlined font.
0 does not display the label in underlined font.
Examples
BUS:B:LABel:FONT:UNDERlin e ON turns on underline font.
BUS:B:LABel:FONT:UNDERlin e? might return
:BUS:B1:LABEL:FONT:UNDERL INE 0 indicating underline is off.
BUS:B<x>:LABel:name
This command sets or queries the label for the specified bus. The bus is specified
by x.
Group
Bus
Syntax
BUS:B<x>:LABel:name <QString>
BUS:B<x>:LABel:name?
Related Commands
BUS:B<x>:TYPe
Arguments
<QString> is an alphanumeric string of text enclosed in quotes. The text string is
limited to 30 characters. It contains the text label information for the bus.
Examples
BUS:B1:LABEL:NAME “TEST” sets the waveform label for the bus B1 to Test.
BUS:B1:LABEL:NAME? might return :BUS:B1:LABEL:NAME “BUS 1”,
indicating that the waveform label for the bus B1 is set to “Bus 1”.
BUS:B<x>:LABel:XPOS
This command sets or queries the x-position of the specified bus label. The bus
is specified by x.
Group
Bus
2-150 MSO54, MSO56, MSO58, MSO58LP Programmer