To Next Page

To Previous Page

Commands listed in alphabetical order

Group

Measurement

Syntax

MEASUrement:MEAS<x>:REFLe vels<x>:ABSolute:RISELow <NR3>

MEASUrement:MEAS<x>:REFLe vels<x>:ABSolute:RISELow?

Arguments

<NR3> is the low reference level, and is the zero percent level when the

measurement's Ref level method is set to Absolute.

Examples

MEASUrement:MEAS1:REFLeve ls1:ABSolute:RISELow -1.5 0 sets the

low reference level to -1.5 V.

MEASUrement:MEAS1:REFLeve ls1:ABSolute:RISELow? might return

:MEASUREMENT:MEAS1:REFLEV ELS1:ABSOLUTE:RISELOW -1. 0000

indicating the low reference level is -1.0 V.

MEASUrement:MEAS<x>:REFLevels<x>:ABSolute:RISEMid

This command sets or queries the value us ed as the mid reference level of the

rising edge when the measurement's ref level method is se t to absolute. The

measurement number is speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:REFLe vels<x>:ABSolute:RISEMid <NR3>

MEASUrement:MEAS<x>:REFLe vels<x>:ABSolute:RISEMid?

Arguments

<NR3> is the mid reference level (where 50% is equal to MID) used to calculate the

mid reference level when the measurement's Ref level method is set to Absolute.

Examples

MEASUrement:MEAS1:REFLeve ls1:ABSolute:RISEMid 30.0 E-3 sets the

mid reference level to 30 mV.

MEASUrement:MEAS1:REFLeve ls1:ABSolute:RISEMid? might return

:MEASUREMENT:MEAS1:REFLEV ELS1:ABSOLUTE:RISEMID 0.0 E+0

indicating the mid reference level is 0.0 V.

MEASUrement:MEAS<x>:REFLevels<x>:ABSolute:TYPE

This command sets or queries the reference level type for the measurement. The

measurement number is speciﬁed b

yx.

2-472 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 User Manual

Other manuals for Tektronix MSO58