Tektronix MSO58 User Manual

Commands listed in alphabetical order
Examples
DISplay:MATHF
FTView1:CURSor:ONEOVERDELTAT VALUE?
might
return
:DISPLAY:MATHFFTVIEW1:CURSO R:ONEOVERDELTATVALUE
533.3333333333334E-12
indicating the one over delta time value is
533.3333333333334E-12.
DISplay:MATHFFTView<x>:CURSor:SCREEN:AXPOSition
This command sets or returns the horizontal cursor A position of the specified
cursor in t
he spec ifi ed view.
Group
Cursor
Syntax
DISplay:MATHFFTView<x>:CU RSor:SCREEN:AXPOSition <N R3>
DISplay:MATHFFTView<x>:CU RSor:SCREEN:AXPOSition?
Arguments
<NR3> is the c ursor position in MHz.
Examples
:DISPLAY:MATHFFTVIEW1:CUR SOR:SCREEN:AXPOSITION 700 .000E+6
sets the cursor position to 700 MHz.
:DISPLAY:MATHFFTVIEW1:CUR SOR:SCREEN:AXPOSITION 625 .000E+6
might return :DISPLAY:MATHFFTVIEW1:CURSOR:S CREEN:AXPOSITION
62
5.000E+6
indicating the cursor position is 625 MHz.
DISplay:MATHFFTView<x>:CURSor:SCREEN:AYPOSition
This command sets or returns the vertical cursor A position of the specified cursor
in the specified view.
Group
Cursor
Syntax
DISplay:MATHFFTView<x>:CU RSor:SCREEN:AYPOSition <N R3>
DISplay:MATHFFTView<x>:CU RSor:SCREEN:AYPOSition?
Arguments
<NR3> is the cursor A position of the specified cursor in the specified view.
Examples
DISplay:MATHFFTView1:CURS or:SCREEN:AYPOSition 1.0e 0 sets the
cursor position to 1.0 dBm.
2-238 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English