Tektronix MSO58 - SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553 B:COMMAND:PARity; SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553 B:COMMAND:SUBADdress

Commands listed in alphabetical order
SEARCH:SEARC
H<x>:TRIGger:A:BUS:MIL1553B:COMMAND:PARity
This command sets or queries the value of the command word parity bit for a
MIL-STD-1553 bus to search on. The search number is specified by x. The search
condition mu
st be set to COMMAND.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:COMMAND:PARity
{ONE|ZERo|NOCARE}
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:COMMAND:PARity?
Arguments
ONE filters command words to only match those where the parity bit has a value
of 1.
ZERo filters command words to only match those where the parity bit has a value
of 0.
NOCARE disables fi ltering of command words on the parity bit.
Examples
SEARCH:SEARCH1:TRIGGER:A: BUS:MIL1553B:COMMAND:PARITY ONE
specifies fi ltering command words for those where the parity bit has a value of 1.
SEARCH:SEARCH1:TRIGGER:A: BUS:MIL1553B:COMMAND:PARITY? might
return NOCARE, indicating that command words are not being filtered based
on the p arity bit v alue.
SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:SUBADdress
This command sets or queries the value of the command word s ubaddress field
for a MIL-STD-1553 bus to search on. The search number is specified by x. The
search condition must be set to COMMAND.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:COMMAND:SUBADdress
<QString>
SEARCH:SEARCH<x>:TRIGger: A:BUS:MIL1553B:COMMAND:SUBADdress?
2-684 MSO54, MSO56, MSO58, MSO58LP Programmer