Tektronix MSO58

Commands listed in alphabetical order
SEARCH:SEARCH
1:TRIGger:A:RUNT:THReshold:H IGH?
might return
:SEARCH:SEARCH1:TRIGGER:A: RUNT:THRESHOLD:HIGH 0.0E+ 0 indicating
the h igh threshold is 0.0 V.
SEARCH:SEAR
CH<x>:TRIGger:A:RUNT:THReshold:LOW
Sets or queries the source threshold LOW level for a runt trigger search to
determine where to place a mark. The search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :RUNT:THReshold:LOW <NR3>
SEARCH:SEARCH<x>:TRIGger:A :RUNT:THReshold:LOW?
Arguments
<NR3> is the source threshold LOW level for a runt trigger sear ch.
Examples
SEARCH:SEARCH1:TRIGger:A:R UNT:THReshold:LOW 50.0e-3 sets the
thresholdo to 50 mV.
SEARCH:SEARCH1:TRIGger:A:R UNT:THReshold:LOW? might return
:SEARCH:SEARCH1:TRIGGER:A: RUNT:THRESHOLD:LOW 0.0E+0 indicating
the threshold is 0.0 V.
SEARCH:SEARCH<x>:TRIGger:A:RUNT:WHEn
This command sets or queries the condition setting for a runt trigger search to
determine where to place a mark. The search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :RUNT:WHEn
{OCCURS|LESSthan|MOREthan| EQual}NOTEQual}
SEARCH:SEARCH<x>:TRIGger:A :RUNT:WHEn?
Arguments
LESSthan argument sets the oscilloscope to search if the a
runt pulse is detected with width less than the time set by the
SEARCH:SEARCH<x>:TRIGger:A :RUNT:WIDth command.
MOREthan argument sets the oscilloscope to search if the a
runt pulse is detected with width more than the time set by the
SEARCH:SEARCH<x>:TRIGger:A :RUNT:WIDth comman
d.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-729