Tektronix MSO58

Commands listed in alphabetical order
SEARCH:SEARC
H<x>:TRIGger:A:SETHold:LEVel:CH<x>
This command sets or queries the voltage level to use for setup & hold trigger
search. The search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :SETHold:LEVel:CH<x> <NR3 >
SEARCH:SEARCH<x>:TRIGger:A :SETHold:LEVel:CH<x>?
Arguments
<NR3> the voltage level to use for setup & hold trigger search.
Examples
SEARCH:SEARCH1:TRIGger:A:S ETHold:LEVel:CH1 50.0e-3 sets the level
to 50.0 mV.
SEARCH:SEARCH1:TRIGger:A:S ETHold:LEVel:CH1? might return
:SEARCH:SEARCH1:TRIGGER:A: SETHOLD:LEVEL:CH1 0.0E+0 indicating
the level is 0.0 V.
SEARCH:SEARCH<x>:TRIGger:A:SETHold:LEVel:MATH<x>
This command sets or queries the voltage level to use for setup & hold trigger
search. The search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :SETHold:LEVel:MATH<x> <N R3>
SEARCH:SEARCH<x>:TRIGger:A :SETHold:LEVel:MATH<x>?
Arguments
<N
R3>
isi the voltage level to use for setup & hold trigger search.
Examples
SEARCH:SEARCH1:TRIGger:A:S ETHold:LEVel:MATH1 50.0e- 3 sets the
level to 50.0 mV.
SEARCH:SEARCH1:TRIGger:A:S ETHold:LEVel:MATH1? might return
:SEARCH:SEARCH1:TRIGGER:A: SETHOLD:LEVEL:MATH1 0.0E+ 0 indicating
the level is 0.0 V.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-733