Tektronix MSO58 - TRIGger:{A|B}:BUS:B<x>:MIL1553 B:STATus:BIT:SRQ; TRIGger:{A|B}:BUS:B<x>:MIL1553 B:STATus:BIT:SUBSF

Commands listed in alphabetical order
Arguments
ONE filters stat
us words to only match those where the ME bit has a value of 1.
ZERo filters status words to only match those where the ME bit has a value of 0.
NOCARE disables filtering of status words on the ME bit.
Examples
TRIGGER:A:BUS:B1:MIL1553B :STATUS:BIT:ME ONE specifies filtering
status words for those where the ME bit has a value of 1.
TRIGGER:A:BUS:B1:MIL1553B :STATUS:BIT:ME? might return NOCARE,
indicating that status words are not being filtered based on the ME bit value.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:STATus:BIT:SRQ
This command sets or queries the value of the status word service request bit
(SRQ bit, bit 11) in a s tatus word for a MIL-STD-1553 bus to triggering on. The
bus number is specified by x. The trigger condition must be set to STATus.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:MI L1553B:STATus:BIT:SRQ
{ONE|ZERo|NOCARE}
TRIGger:{A|B}:BUS:B<x>:MI L1553B:STATus:BIT:SRQ?
Arguments
ONE filters status words to only match those where the SRQ bit has a value of 1.
ZERo filters status words to only match those where the SRQ bit has a value of 0.
NOCARE disables filtering of status words on the SRQ bit.
Examples
TRIGGER:A:BUS:B1:MIL1553B :STATUS:BIT:SRQ ONE specifies filtering
status words for those where the SRQ bit has a value of 1.
TRIGGER:A:BUS:B1:MIL1553B :STATUS:BIT:SRQ? might return NOCARE,
indicating that status words are not being filtered based on the SRQ bit value.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:STATus:BIT:SUBSF
This command sets or queries the value of the subsystem flag bit (SUBSF bit, bit
17) in a status word for a MIL-STD-1553 bus to triggering on. The bus number is
specified by x. The trigger condition must be set to STATus.
2-826 MSO54, MSO56, MSO58, MSO58LP Programmer