Tektronix MSO58

Commands listed in alphabetical order
Group
Power
Syntax
POWer:POWer<x>:HARMONICS: POWERRating {HIGH | LOW}
POWer:POWer<x>:HARMONICS: POWERRating?
Related Commands
POWer:POWer<x>:HARMONICS:STANDard
Examples
POWer:POWer1:HARMONICS:PO WERRating HIGH sets the power level for
the harmonics measurement as high.
POWer:POWer<x>:HARMONICS:RCURRent
This command sets or queries the rated current for the harmonics measurement
in the specified power measurement badge. The power measurement badge
is specified by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
Syntax
POWer:POWer<x>:HARMONICS: RCURRent <NR1>
POWer:POWer<x>:HARMONICS: RCURRent?
Related Commands
POWer:POWer<x>:HARMONICS:CMEThod
Arguments
<NR1> ranges from 0 to 100
Examples
POWer:POWer1:HARMONICS:RC URRent 1.5 sets the rated current for the
harmonics mea
surement as 1.5.
POWer:POWer<x>:HARMONICS:STANDard
This command sets or queries the test mode for harmonics measurement in the
specified power measurement badge. The power measurement badge is specified
by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
2-542 MSO54, MSO56, MSO58, MSO58LP Programmer