Tektronix MSO58

Commands listed in alphabetical order
MEASUrement:M
EAS1:POPUlation:GLOBal?
might return
:MEASUREMENT:MEAS1:POPULA TION:GLOBAL 0 indicating that population
settings can be changed independently for each individual measurement.
MEASUrement
:MEAS<x>:POPUlation:LIMIT:STATE
This command sets or queries the population limit state for the measurement. The
measurement number is specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:POPUl ation
:LIMIT:STATE {OFF|ON|0|1}
MEASUrement:MEAS<x>:POPUl ation:LIMIT:STATE?
Arguments
OFF turns off the population limit.
ON turns on the population limit.
0 turns off the population limit.
1 turns on the population limit.
Examples
MEASUrement:MEAS1:POPUlat ion:LIMIT:STATE 0 turn
s off the population
limit.
MEASUrement:MEAS1:POPUlat ion:LIMIT:STATE? migh
treturn
:MEASUREMENT:MEAS1:POPULA TION:LIMIT:STATE 1 indicating the
population limit is on.
MEASUrement:MEAS<x>:POPUlation:LIMIT:VA Lue
This command sets or queries the population limit value for the measurement.
The measurement number is specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:POPUl ation:LIMIT:VALue <NR3>
MEASUrement:MEAS<x>:POPUl ation:LIMIT:VALue?
Arguments
<NR3> the current limit value.
2-468 MSO54, MSO56, MSO58, MSO58LP Programmer