Tektronix MSO58 User Manual

Commands listed in alphabetical order
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:LOGICPattern:REF<x> {H|L|X}
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:LOGICPattern:REF<x>?
Arguments
H specifies triggering when the pattern is high.
L specifies triggering when the pattern is low.
X specifies triggering when the pattern is high or low.
Examples
SEARCH:SEARCH1:TRIGger:A:L OGIc:LOGICPattern:REF1 H sets the
pattern to a high.
SEARCH:SEARCH1:TRIGger:A:L OGIc:LOGICPattern:REF1? might return
:SEARCH:SEARCH1:TRIGGER:A: LOGIC:LOGICPATTERN:REF1 X indicating
the p attern is a don’t care.
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:POLarity
This command sets or queries the polarity for the clock channel when Use Clock
Edge is set to Yes for Logic search type. The search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:POLarity
{POSitive|NEGative|EITher}
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:POLarity?
Arguments
POSitive specifi es using the positive clock edge.
NEGative specifies using negative clock edge.
EITher specifies using e ither the positive or negat
ive clock edge.
Examples
SEARCH:SEARCH1:TRIGger:A:L OGIc:POLarity NEGATIVE sets the polarity
to negative.
SEARCH:SEARCH1:TRIGger:A:L OGIc:POLarity? might return
:SEARCH:SEARCH1:TRIGGER:A: LOGIC:POLARITY POSITIVE indicating
the polarity is set to positive.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-721

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English