Tektronix MSO58

Commands listed in alphabetical order
BUS:B<x>:LIN:
BITRate?
Related Commands
BUS:B<x>:LIN:BITRate:CUSTom
Arguments
Arguments are the available b
it rates.
Examples
BUS:B1:LIN:BITRate Rate4k sets the bit rate to 4 kb.
BUS:B1:LIN:BITRate? might return :BUS:B1:LIN:BITRATE RATE19 K,
indicating that the bit rate is set to 19 kb.
BUS:B<x>:LIN:BITRate:CUSTom
This command sets o r queries LIN custom bit rate for the specified bus. The
bus is specified by x.
Conditions
Requires option SR-AUTO.
Group
Bus
Syntax
BUS:B<x>:LIN:BITRate:CUST om <NR1>
BUS:B<x>:LIN:BITRate:CUST om?
Related Commands
BUS:B<x>:LIN:BITRate
Arguments
<NR1> is the LIN custom bit rate for the specified bus.
Examples
BUS:B1:LIN:BITRate:CUSTom 9000 sets the bit rate to 9,000.
BUS:B1:LIN:BITRate:CUSTom ? might re
turn
:BUS:B1:LIN:BITRate:CUSTo m 10000 indicating the bit rate is set to 10,000.
BUS:B<x>:LIN:IDFORmat
This command sets or queries LIN bus identifier format for the specified bus. The
bus number is specified by x.
Conditions
Requires option SR-AUTO.
2-152 MSO54, MSO56, MSO58, MSO58LP Programmer