To Next Page

To Previous Page

Commands listed in alphabetical order

INrange sets th

e qualiﬁer to in range.

OUTrange sets the qualiﬁer to out of range.

Examples

TRIGger:A:BUS:B1:ETHERnet :DATa:QUALifier LESSTHAN sets the

qualiﬁer to less than.

TRIGger:A:BUS:B1:ETHERnet :DATa:QUALifier? might return

:TRIGGER:A:BUS:B1:ETHERNE T:DATA:QUALIFIER EQUAL indicating the

qualiﬁer is set to equal.

TRIGger:{A|B}:BUS:B<x>:ETHERnet:DATa:SIZe

When the Ethernet trigger condition is set to DA Ta, this command speciﬁes the

number of contiguous TCP/IPv4/MAC client data bytes to trigger o n. The bus

number is speciﬁed by <x>.

Conditions

Requires the SR-ENET Triggering and Analysis application.

Group

Trigger

Syntax

TRIGger:{A|B}:BUS:B<x>:ET HERnet:DATa:SIZe <NR1>

TRIGger:{A|B}:BUS:B<x>:ET HERnet:DATa:SIZe?

Related Commands

TRIGger:{A|B}:BUS:B<x>:ETHERnet:CONDition

Arguments

The minimum and default values are 1 and maximum is 16, except when the

qualiﬁer is set to Inside Range or Outside Range. In these cases, the maximum

size is 4.

Examples

TRIGger:A:BUS:B1:ETHERnet :DATa:SIZe 4 sets the o scilloscope to trigger

on 4 contiguous data bytes.

TRIGger:A:BUS:B1:ETHERnet :DATa:SIZe? might return 6, indicating that

the oscilloscope is set to trigger on 6 contiguous data bytes.

TRIGger:{A|B}:BUS:B<x>:ETHERnet:DATa:VALue

When the Ethernet trigger condition is set to DATa, and the qualiﬁer is set to

LESSthan, MOREthan, EQual, UNEQual, LESSEQual or MOREEQ ual ,

this command speciﬁes the value to trigger on. When the Ethernet trigger

condition is set to

DATa, and the qualiﬁer is set to INrange or OUTran ge,

2-782 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 User Manual

Other manuals for Tektronix MSO58