Tektronix MSO58

Commands listed in alphabetical order
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:
USB:DATa:QUALifier {EQual|UNEQual|
LESSthan|MOREthan|LESSEQu al|MOREEQual|INrange|OUTrange}
Arguments
EQUal specifies the qualifier as Equal.
INrange specifi es the qualifier as Inside Range.
LESSEQual specifies the qualifi er as Less Than or Equal to.
MOREEQual specifies the qualifier as More Than or Equal to.
OUTrange specifies the qualifier as Out of Range.
UNEQual specifies the qualifier as Unequal.
LESSThan specifies the qualifier as Less Than.
MOREThan specifies the qualifier as More Than.
Examples
SEARCH:SEARCH1:TRIGger:A: BUS:USB:DATa:QUALifier IN RANGE sets
the qualifier to IN RANGE.
SEARCH:SEARCH1:TRIGger:A: BUS:USB:DATa:QUALifier? might return
:SEARCH:SEARCH1:TRIGGER:A :BUS:USB:DATA:QUALIFIER E QUAL
indicating the qualifier is set to equal.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:DATa:SIZe
This command sets or queries the length of the data string, in bytes, used for
a USB bus search to dete rmine where to place a mark. The search number is
specified by <x>. The search c ondition must be set to DATA.
Conditions
Requires the SR-USB2 Serial Triggering and Analysis Application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:USB:DATa:SIZe <NR1>
SEARCH:SEARCH<x>:TRIGger: A:BUS:USB:DATa:SIZe?
Arguments
<NR1> specifies the data size in bytes.
2-704 MSO54, MSO56, MSO58, MSO58LP Programmer