Tektronix MSO58 User Manual

Commands listed in alphabetical order
Examples
MATH:MATH2:SP
ECTRAL:HORZ LOG
sets the horizontal display scale of the
spectral math waveform to log.
MATH:MATH3:S
PECTRAL:HORZ?
might return :MATH:MATH3:SPECTRAL:HORZ
LINEAR
indicating the horizontal display scale of the Math 3 spectral math
waveform is currently set to linear.
MATH:MATH<
x>:SPECTral:MAG
This command sets or queries the units of the SpectralMag function in the
specified math definition string. The Math waveform is specified by x.
Group
Math
Syntax
MATH:MATH<x>:SPECTral:MAG {LINEAr|DBM}
MATH:MATH<x>:SPECTral:MAG?
Arguments
LINEAR sets the SpectralMag units to linear.
DBM sets the SpectralMag units to decibels. It also sets the Ref Level Offset to a
value that is the equivalent of 1 mW into 50 Ω.
Examples
MATH:MATH2:SPECTral:MAG DBM sets the SpectralMag units for Math 2
waveform to decibels.
MATH:MATH2:SPECTral:MAG? might return :MATH:MATH2:SPECTral :MAG
DBM
, indicating that the SpectralMag units for Math 2 waveform are set to decibels.
MATH:MATH<x>:SPECTral:PHASE
This command sets or queries the units of a SpectralPhase function in the specified
math definition string. The Math waveform is speci fied by x.
Group
Math
Syntax
MATH:MATH<x>:SPECTral:PHAS E {DEGrees|RADians|GROUPDela y}
MATH:MATH<x>:SPECTral:PHAS E?
Arguments
DEGREES sets the SpectralPhase units to degrees.
RADIANS sets the SpectralPhase units to radians.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-373

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English