Commands listed in alphabetical order
Examples
DISplay:MATHF
FTView1:XAXIS:SCALE LOG
specifies a logarithmic scale.
DISplay:MATHFFTView1:XAXIS :SCALE? might return
:DISPLAY:MAT
HFFTVIEW1:XAXIS:SCALE LINEAR
indicates the
scale setting is linear.
DISplay:MATHFFTView<x>:YAXIS:SCALE
This command sets or queries the vertical scale setting for FFT Maths, either
Linear or dBm.
Group
Display Control
Syntax
DISplay:MATHFFTView<x>:YAX IS:SCALE {LINEAr|DBM}
DISplay:MATHFFTView<x>:YAX IS:SCALE?
Arguments
LINEAr specifies a linear scale.
DBM specifies a dBm scale.
Examples
DISplay:MATHFFTView1:YAXIS :SCALE LINEAR specifies a linear scale.
DISplay:MATHFFTView1:YAXIS :SCALE? might return
:DISPLAY:MATHFFTVIEW1:YAXI S:SCALE DBM incicating the scale
is dBm.
DISplay:MATHFFTView<x>:ZOOM:XAXIS:FROM
This command sets or queries the value of the left edge of the specified plot view.
Group
Zoom
Syntax
DISplay:MATHFFTView<x>:ZOO M:XAXIS:FROM <NR3>
DISplay:MATHFFTView<x>:ZOO M:XAXIS:FROM?
Arguments
<NR3> is the value of the left edge of the zoom x axis in the specified plot view.
Examples
DISplay:MATHFFTView1:ZOOM: XAXIS:FROM 800.e6 sets the x axis value of
the left edge of the plot view to 800 MHz.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-245
To Next Page
Loading...
Need help?
General
