Tektronix MSO58

Commands listed in alphabetical order
MEASUrement:
MEAS<x>:MEASRange:MIN
This command sets or queries the range minimum value for the measurement.
Measurements are specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:MEASR ange:MIN <NR3>
MEASUrement:MEAS<x>:MEASR ange:MIN?
Arguments
<NR3> is the minimum measurement range limit value.
Examples
MEASUrement:MEAS1:MEASRan ge:MIN -1.0 sets the minimum measurement
range to -1.0 V.
MEASUrement:MEAS1:MEASRan ge:MIN? might return
:MEASUREMENT:MEAS1:MEASRA NGE:MIN 0.0E+0 indicating the
minimum range is 0.0 V.
MEASUrement:MEAS<x>:MEASRange:STATE
This command sets or queries the range state for the m easurement. Measurements
are specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:MEASR ange:STATE {OFF|ON|0|1}
MEASUrement:MEAS<x>:MEASR ange:STATE?
Arguments
OFF turns off the measurement range limits.
ON turns on the measurement range limits.
0 turns off the measurement range limits.
1 turns on the measurement range limits.
Examples
MEASUrement:MEAS1:MEASRan ge:STATE 0 turns off the measurement range
limits.
MEASUrement:MEAS1:MEASRan ge:STATE? might return
:MEASUREMENT:MEAS1:MEASRA NGE:STATE 1 indicating the
measurement range limits are on.
2-464 MSO54, MSO56, MSO58, MSO58LP Programmer