Tektronix MSO58 User Manual

Commands listed in alphabetical order
Examples
SEARCH:SEARCH
1:TRIGGER:A:BUS:USB:ADDRESS: HIVALUE
SEARCH:SEARCH1:TRIGGER:A:B US:USB:ADDRESS:HIVALUE?
might return
:SEARCH:SEAR
CH1:TRIGGER:A:BUS:USB:ADDR ESS:HIVALUE "XX"
,
indicating that the address value for normal token for USB bus trigger search 1 is
set to "XX," in hexadecimal format.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:VALue
This command sets or querie s the binary address value use d for a USB bus search
to determine where to place a mark. The search number is specified by <x>. The
search condition must be set to TOKEN.
Conditions
Requires the SR-USB2 Serial Triggering and Analysis Application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:USB:ADDress:VALue <Q String>
SEARCH:SEARCH<x>:TRIGger:A :BUS:USB:ADDress:VALue?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:ADDress:HIVALue
Arguments
<QString> specifies the data value in the sp
ecified valid format. Valid characters
are 0, 1, and X for binary; A-F, 0-9 and X for hexadecimal; and for symbolic.
Examples
SEARCH:SEARCH1:TRIGGER:A:B US:USB:ADDRESS:VALUE "111 0000" sets
the address value for the normal token for USB bus trigger search 1 to "1110000"
in binary format.
SEARCH:SEARCH1:TRIGGER:A:B US:USB:ADDRESS:VALUE? might return
:SEARCH:SEARCH1:TRIGGER:A: BUS:USB:ADDRESS:VALUE "11 ", indicating
that the address value for normal token for USB bus trigger search 1 is set to
"11" hexadecimal format.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:CONDition
This command sets or queries the search condition for a USB bus search to
determine where to place a mark. The search number is specified by <x>.
Conditions
Requires the SR-USB2 Serial Triggering and Analysis Application.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-701

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English