To Next Page

To Previous Page

Commands listed in alphabetical order

MEASUrement:

MEAS<x>:JITTERSummary:PJ

This command sets or queries whether PJ is included in the jitter summary for

the measurement. Measurements are speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:JITTE RSummary:PJ {0|1}

MEASUrement:MEAS<x>:JITTE RSummary:PJ?

Arguments

1 add the PJ measurement as part of jitter summary.

0 do not add the PJ measurement as part of jitter summary.

Examples

MEASUrement:MEAS4:JITTERS ummary:PJ 0 speciﬁesthePJmeasurement

is not part of jitter summary.

MEASUrement:MEAS4:JITTERS ummary:PJ? might return

:MEASUREMENT:MEAS4:JITTER SUMMARY:PJ 1 indicating the PJ

measurement is part of jitter summary.

MEASUrement:MEAS<x>:JITTERSummary:RJDD

This command sets or queries whether RJ-dd is included in the jitter summary for

the measurement. Measurements are speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:JITTE RSummary:RJDD {0|1}

MEASUrement:MEAS<x>:JITTE RSummary:RJDD?

Arguments

1 add the RJ-dd m easurement as part of jitter summary.

0 do not add the RJ-dd measurement as part of jitter summary.

Examples

MEASUrement:MEAS4:JITTERS ummary:RJDD 0 speciﬁes the RJ-dd

measurement is not part of the jitter summary.

MEASUrement:MEAS4:JITTERS ummary:RJDD? might return

:MEASUREMENT:MEAS4:JITTER SUMMARY:RJDD 1 indicating the RJ-dd

measurement is part of the jitter summary.

2-460 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 User Manual

Other manuals for Tektronix MSO58