Tektronix MSO58

Commands listed in alphabetical order
Examples
BUS:B1:FLEXRA
Y:BITRate RATE2M
sets the bit rate to 2 Mb.
BUS:B1:FLEXRAY:BITRate? might return :B US:B1:FLEXRAY:BI TRATE
RATE10M
, indicating the bit rate is 10 Mb.
BUS:B<x>:FLEXray:BITRate:CUSTom
This command sets or queries the FlexRay custom bit rate for the specified bus.
The bus is specified by x.
Conditions
Requires option SR-AUTO.
Group
Bus
Syntax
BUS:B<x>:FLEXray:BITRate: CUSTom <NR1>
BUS:B<x>:FLEXray:BITRate: CUSTom?
Arguments
<NR1> is the FlexRay custom bit rate for the specified bus.
Examples
BUS:B1:FLEXray:BITRate:CU STom 10000000 sets the bit rate to 10,000,000.
BUS:B1:FLEXray:BITRate:CU STom? might return
:BUS:B1:FLEXRAY:BITRATE:C USTOM 10000000 indicating the bit rate
is set to 10,000,000.
BUS:B<x>:FLEXray:CHannel
This command sets or queries the FlexRay channel type for the specified bus. The
bus number is specified by x.
Conditions
Requires option SR-AUTO.
Group
Bus
Syntax
BUS:B<x>:FLEXray:CHannel {A|B}
BUS:B<x>:FLEXray:CHannel?
Arguments
A specifies the A channel.
B specifies the B channel.
2-140 MSO54, MSO56, MSO58, MSO58LP Programmer