Tektronix MSO58 User Manual

Commands listed in alphabetical order
ETHERnet:ENE
T:ADDress? (Query Only)
Returns the Ethernet address (MAC address) value assigned to the oscilloscope.
This is assigned at the factory and can not be changed.
Group
Ethernet
Syntax
ETHERnet:ENET:ADDress?
Examples
ETHERNET:ENET:ADDRESS? returns an Ethernet address such as
08:00:11:01:02:03
ETHERnet:GATEWay:IPADDress
This command specifies the network gateway IP address.
Group
Ethernet
Syntax
ETHERnet:GATEWay:IPADDres s <QString>
ETHERnet:GATEWay:IPADDres s?
Related Commands
ETHERnet:NETWORKCONFig, ETHERnet:IPADDress, ETHERnet:
SUBNETMask
Arguments
<QString> is a standard IP address value, enclosed in quotes.
Examples
ETHERNET:GATEWAY:IPADDRES S "128.143.16.1 " sets the gateway IP
address.
ETHERnet:IPADDress
This command sets the IP address assigned to the oscilloscope.
Group
Ethernet
Syntax
ETHERnet:IPADDress <QString>
ETHERnet:IPADDress?
2-324 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English