EasyManua.ls Logo

Tektronix MSO58

Tektronix MSO58
1026 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Commands listed in alphabetical order
MEASUrement:
MEAS<x>:GATing:MIDRef
This command sets or queries the gating mid ref value when the gating type is
logic. Measurements are specied by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:GATing :MIDRef <NR3>
MEASUrement:MEAS<x>:GATing :MIDRef?
Arguments
<NR3> is the mid ref value for gating.
Examples
MEASUrement:MEAS1:GATin
g:MIDRef 1.0E+0
sets the gating midref to 1.0.
MEASUrement:MEAS1:GATing:M IDRef? might return
:MEASUREMENT:MEAS1:GAT
ING:MIDREF 0.0E+0
indicating the
midref value is set to 0.0.
MEASUrement:MEAS<x>:GATing:SEARCHSource
This command sets or que
riesthegatingsearchsourcewhenthegatingtypeis
search. The measurement number is specied by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:GATing :SEARCHSource SEARCH1
Arguments
SEARCH1 is the gating source for search gating.
Examples
MEASUrement:MEAS1:GATing:S EARCHSource SEARCH1 sets the gating
search source to SEARCH1.
MEASUrement:MEAS1:GATing:S EARCHSource? might return
:MEASUREMENT:MEAS1:GATING: SEARCHSOURCE SEARCH1 indicating the
gating search source is SEARCH1.
MEASUrement:MEAS<x>:GLOBalref
This command sets or queries the refe rence levels global ag for the measurement.
Measurements are specied by x.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-455

Table of Contents

Other manuals for Tektronix MSO58

Related product manuals