Tektronix MSO58 User Manual

Commands listed in alphabetical order
Group
Trigger
Syntax
TRIGger:{A|B}:RUNT:LOGICQ UALification {ON|OFF}
TRIGger:{A|B}:RUNT:LOGICQ UALification?
Arguments
ON specifies that the runt trigger type uses logic qualification.
OFF specifies that the runt trigger type does not use logic qualification.
Examples
TRIGger:A:RUNT
:LOGICQUALification ON
turns on logic qualification.
TRIGger:A:RUNT:LOGICQUALi fication? might return
:TRIGGER:A:RUNT:LOGICQUAL IFICATION OFF indicating logic
qualification is off.
TRIGger:{A|B}:RUNT:POLarity
This command specifies the polarity for the runt trigger.
Group
Trigger
Syntax
TRIGger:{A|B}:RUNT:POLari ty {EITher|NEGative|POSitive }
TRIGger:{A|B}:RUNT:POLari ty?
Arguments
POSitive indicates that the rising edge crosses the low threshold and the falling
edge recrosses the low threshold without either edge ever crossing the high
threshold.
NEGative indicates that the falling edge crosses the high threshold and the
rising edge recrosses the high threshold without either edge ever crossing the
low threshold.
EITher triggers on a runt of either polarity.
Examples
TRIGger:A:RUNT:POLarity NEGATIVE specifies that the polarity of the A
pulse runt trigger is negative.
TRIGger:A:RUNT:POLarity? might return :TRIGGER:A:RUNT:POLARIT Y
POSITIVE
indicating that the polarity of the A pulse runt trigger is positive.
TRIGger:{A|B}:RUNT:SOUrce
This command specifies the source waveform for the runt trigger.
2-860 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English