Tektronix MSO58 User Manual

Commands listed in alphabetical order
CH<x>_DALL:L
ABel:FONT:ITALic
This command sets or queries the italic state of the specified digital group. The
channel is specified by x.
Group
Digital
Syntax
CH<x>_DALL:LABel:FONT:ITA Lic {ON|OFF|<NR1>}
Arguments
OFF argument turns off italic font.
ON argument turns on italic font.
<NR1> = 0 turns off italic font; any other value turns on italic font.
Examples
CH1_DALL:LABel:FONT:ITALi c 1 turns on italic font.
CH1_DALL:LABel:FONT:ITALi c? might return
:CH1_DALL:LABEL:FONT:ITAL IC 0 indicating the font is not italic.
CH<x>_DALL:LABel:FONT:SIZE
This command sets or queries the font size of the specified digital group. The
channel is specified by x.
Group
Digital
Syntax
CH<x>_DALL:LABel:FONT:SIZ E <NR1>
Arguments
<NR1> is the font size.
Examples
CH1_DALL:LABel:FONT:SIZE 16 sets the font size to 16 points.
CH1_DALL:LABel:FONT:SIZE? might return :CH1_DALL:LABEL:FONT:SIZE
20
indicating the font size is 20 points.
CH<x>_DALL:LABel:FONT:TYPE
This command sets or queries the font type of the specified digital group, such as
Arial or Time
s New Roman. The channel is specified by x.
2-206 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English