Tektronix MSO58

Commands listed in alphabetical order
Conditions
Requires the SR
-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:MIL1553B:STATus:
ADDRess:QUALifier
{EQual|UNEQual|LESSthan|MOREthan
|LESSEQual|MOREEQual|INrange|OUTrange}
SEARCH:SEARCH<x>:TRIGger:A :BUS:MIL1553B:STATus:ADDRess:
QUALifier?
Arguments
Arguments are the available address qualifiers.
Examples
SEARCH:SEARCH1:TRIGGER:A:B US:MIL1553B:STATUS:ADDRESS:QUALIFIER
LESSTHAN
sets the address qualifier to less than.
SEARCH:SEARCH1:TRIGGER:A:B US:MIL1553B:STATUS:ADDRESS:QUALIFIER?
might return EQUAL, indicating that the address qualifier is set to e qual.
SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:STATus:ADDRess:VALue
This co mmand sets or queries the low value when searching on status word
addresses for a MIL-STD-1553 bus. The search number is specified by x. The
search condition m ust be set to STATus.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:MIL1553B:STATus:ADDRess:VALue
<QString>
SEARCH:SEARCH<x>:TRIGger:A :BUS:MIL1553B:STATus:ADDRess:
VALue?
Arguments
<QString> is the address value.
Examples
SEARCH:SEARCH1:TRIGGER:A:B US:MIL1553B:STATUS:ADDRESS:VALUE
"X1000
" sets the value to X1000.
SEARCH:SEARCH1:TRIGGER:A:B US:MIL1553B:STATUS:ADDRESS:VALUE?
might return "XXXXX", indicating that the value is XXXXX.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-689