Commands listed in alphabetical order
NOTEQual argum
ent sets the oscilloscope to trigger if a runt pulse is d etected with
width greater than or less than (but not equal to) the time period specified in
TRIGger:{A|B}:RUNT:WIDth within a ±5% tolerance.
Examples
TRIGger:A:RUNT:WHEn MORETHAN sets the runt trigger to occur when the
oscilloscope detects a runt in a pulse wider than the specified width.
TRIGger:A:RUNT:WHEn? might return :TRIGGER:A:PULSE:RUNT:WHEN
OCCURS
indicating that a runt trigger will occur if the oscilloscope detects a runt
of any detectable width.
TRIGger:{A|B}:RUNT:WIDth
This command specifies the width, in seconds, for a runt trigger.
Group
Trigger
Syntax
TRIGger:{A|B}:RUNT:WIDth <NR3>
TRIGger:{A|B}:RUNT:WIDth?
Related Commands
TRIGger:{A|B}:RUNT:WHEn
Arguments
<NR3> is a floating point number that specifies the minimum width, in seconds.
Examples
TRIGger:A:RUNT:WIDth 15E-6 sets the m inimum width o f the pulse runt
trigger to 15 µs.
TRIGger:A:RUNT:WIDth? might return :TRIGGER:A:PULSE:RUNT:WIDT H
2.0000E-09
indicating that the minimum width of a pulse runt trigger is 2 ns.
TRIGger:{A|B}:SETHold:CLOCk:EDGE
This command specifies the clock edge polarity for setup and hold triggering.
Group
Trigger
Syntax
TRIGger:{A|B}:SETHold:CLO Ck:EDGE {FALL|RISe}
TRIGger:{A|B}:SETHold:CLO Ck:EDGE?
2-862 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
