To Next Page

To Previous Page

Commands listed in alphabetical order

Syntax

TRIGger:{A|B}

:BUS:B<x>:USB:DATa:HIVALue <QString>

TRIGger:{A|B}:BUS:B<x>:USB :DATa:HIVALue?

Related Commands

TRIGger:{A|B}:BUS:B<x>:USB:CONDition,

TRIGger:{A|B}:BUS:B<x>:USB:DATa:VALue

Arguments

<QString> within the range 00000000 to 11111111 (00 hex to FF hex).

Examples

TRIGGER:A:BUS:B1:USB:DATA: HIVALUE "00001000" sets the upper limit

to binary 00001000 (08 hex).

TRIGGER:A:BUS:B1:USB:DATA: HIVALUE? might return

:TRIGGER:A:BUS:B1:USB:DATA :HIVALUE "01111111",which

indicates that the upper limit is 0

1111111 (7F hex).

TRIGger:{A|B}:BUS:B<x>:USB:DATa:OFFSet

This command speciﬁ es the data offset in bytes to trigger on. The bus number is

speciﬁed by <x>.

Conditions

Requires the SR-USB2 Serial Triggering and Analysis Application.

Group

Trigger

Syntax

TRIGger:{A|B}:BUS:B<x>:USB :DATa:OFFSet <NR1>

TRIGger:{A|B}:BUS:B<x>:USB :DATa:OFFSet?

Related Commands

TRIGger:{A|B}:BUS:B<x>:USB:CONDition

Arguments

<NR1> is number in the range 0 to 1024.

Examples

TRIGGER:A:BUS:B1:USB:DATA: OFFSET 36 sets the data offset to 36.

TRIGGER:A:BUS:B1:USB:DATA: OFFSET? might return

:TRIGGER:A:BUS:B1:USB:DATA :OFFSET 0, indicating that the

data offset is the default value, 0.

MSO54, MSO56, MSO58, MSO58LP Programmer 2-837

Tektronix MSO58 User Manual

Other manuals for Tektronix MSO58