Tektronix MSO58

Commands listed in alphabetical order
Arguments
Examples
MEASUrement
:MEAS<x>:SSC:NOMinalfreq
This command sets or queries the user-defined frequency for the measurement
when the measurement type is SSC. The measurement number is specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:SSC:N OMinalfreq <NR3>
MEASUrement:MEAS<x>:SSC:N OMinalfreq?
Arguments
<NR3> is the user-defined nominal frequency type for SSC configurations.
Examples
MEASUrement:MEAS1:SSC:NOM inalfreq 2.0E+9 sets the frequency to 2.0
GHz.
MEASUrement:MEAS1:SSC:NOM inalfreq? might return
:MEASUREMENT:MEAS1:SSC:NO MINALFREQ 2.5000E+9 indicating
the f requency is 2.5 GH.
MEASUrement:MEAS<x>:SSC:NOMinalfreq:SELECTIONtype
This command sets or queries the frequency detection type for the measurement
when the measurement type is SSC. The measurement number is specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:SSC:N OMinalfreq:SELECTIONtype
{AUTO|MANual}
MEASUrement:MEAS<x>:SSC:N OMinalfreq:SELECTIONtype?
Arguments
AUTO automatically sets the detection type.
MANual specifies the manual detection type.
Examples
MEASUrement:MEAS1:SSC:NOM inalfreq:SELECTIONtype AU TO specifies
the auto-detection type.
2-486 MSO54, MSO56, MSO58, MSO58LP Programmer